Unlocked Firmware for JioFi 3 JMR540 & JMR541
Disclaimer
I am not responsible for any kind of damage to your device.
Use this firmware at your own risk
Post is for educational purpose only.
ONLY FOR JMR 540 & JMR 541
I was able to dump and reverse engineer JioFi 3's firmware to see if I can unlock the SIM restrictions. JioFi 3 is designed by Foxconn it uses generic firmware. Unlocking took time though. Tested with Vi, Airtel.
UPDATE 17-10-21: Jio pushed a firmware update which is locking boot loader. If your device is not updated yet it is advised to re-flash your firmware with patched image given below which basically disables auto updates. If you're already locked out, currently there's no easy fix for that.
If you haven't used your device from a long time or you're still on lower or equal version than below it is advised not to use JioFi with SIM, flash this firmware first if you want to test SIM unlock.
Guide
Make sure you're on same or lower firmware version
- JMR 540 - FXN_JMR540_R6.16
- JMR 541 - FXN_JMR541_R3.10
1. Locate your device model and download the respective Firmware and extract it to a known location
2. Install drivers and tools (skip if already installed)
Install Fastboot drivers ( google it for mac and linux it's easy to find) Install Fastboot ( google it for mac and linux it's easy to find)
3. Prepare device
- Remove battery from JioFi 3
- Locate reset pin hole button
- Lay down JioFi 3
- Use Paper Clip / SIM Ejector Tool to press button inside (using sharp object is not recommended)
- Keep pressing button down and insert USB cable
- Release button as soon as all the LEDs in Display turns RED. This means device is in boot loader mode
4. Flashing Unlocked Firmware
- Open adb and fastboot tools terminal
- Enter following to check if device is connected
- It will return something like this
baxxxxx fastboot
- This means device is connected. If your device doesn't show up here please check drivers in Device manager
- Now first erase the system partition
- It will return something like this
erasing 'system'...
OKAY [ 1.104s]
finished. total time: 1.105s
- Now flash the firmware
fastboot flash system "D:\system.img" ( replace path )
- It should return something like this
sending 'system' (34306 KB)...
OKAY [ 1.276s]
writing 'system'...
OKAY [ 9.462s]
finished. total time: 10.741s
- Now send reboot command to device
fastboot reboot
- You'll notice device will reboot normally now you can unplug the cable.
Congratulations your device is now unlocked and you can reinsert battery and another SIM for testing.
Firmware will take long time than usual to boot do not panic.
4. Changing APN
- Insert SIM connect with JioFi 3 wait it to intialize
- Open Web UI from browser (http://jiofi.local.html/)
- Now login (default username/pwd is administrator/administrator)
- In Network Tab you'll find setting for changing APN
- Put it on manual and enter "internet" as APN (without quotes)
- Hit apply/save device will reboot again automatically and it'll auto connect
- Just wait patience is the key here it'll connect.
If something goes WRONG or you want to UNDO you can re flash original firmware which is provided in this post.
Original backup
FAQs
- Q. My device is not visible in fastboot devices
A. Confirm driver installation a faulty cable can also be the issue.
- Q. Everything went well but still no changes in dashboard
A. After successful flash if you still don't see the changes your device is probably booting from recovery partition. Try flashing recovery partition by
fastboot erase recoveryfs
fastboot flash recoveryfs "D:\system.img"
- Q. After resetting device from pin hole button it shows INVALID SIM.
A. This is supposed to happen just reboot the device it'll work again.
- Q. Can I undo all this and get back to original firmware
A. Yes just flash the original firmware provided in post and reset the device.
- Q. I 'accidentally' flashed my recovery and boot partition
A. Well accidentally I've backed up recovery and boot download from below
1. JMR540_boot_recovery.rar
2. JMR541_boot_recovery.rar
- Q. FAILED: (remote: Image is locked) issue while erasing/flashing image
A. Jio recently pushed an firmware update which re-locks simlock and bootloader which basically means you can't flash unsigned/custom firmware. Currently there is no fix.
Original Thread here by abhimortal6
Disclaimer
Post a Comment